Installation manual

Interface (ItF)
268 S1A28692 03/2010
Parameters described in this page can be accessed by:
Communication map configuration
Code Name / Description Factory setting
AdL- [COM. MAP CONFIG.]
IAd1 [Word 1 add. select.]
0
T
Select the address of the word to be displayed by pressing the << and >> (F2 and F3) keys and rotating the jog dial.
FAd1 [Format word 1]
[Hex] (HE )
T
Format of word 1.
HE
SIG
nSG
[Hex] (HE )
[Signed] (SIG)
[Unsigned] (nSG)
IAd2 [Word 2 add. select.]
0
T
Select the address of the word to be displayed by pressing the << and >> (F2 and F3) keys and rotating the jog dial.
FAd2 [Format word 2]
[Hex] (HE )
T
Format of word 2.
HE
SIG
nSG
[Hex] (HE )
[Signed] (SIG)
[Unsigned] (nSG)
IAd3 [Word 3 add. select.]
0
T
Select the address of the word to be displayed by pressing the << and >> (F2 and F3) keys and rotating the jog dial.
FAd3 [Format word 3]
[Hex] (HE )
T
Format of word 3.
HE
SIG
nSG
[Hex] (HE )
[Signed] (SIG)
[Unsigned] (nSG)
IAd4 [Word 4 add. select.]
0
T
Select the address of the word to be displayed by pressing the << and >> (F2 and F3) keys and rotating the jog dial.
FAd4 [Format word 4]
[Hex] (HE )
T
Format of word 4.
HE
SIG
nSG
[Hex] (HE )
[Signed] (SIG)
[Unsigned] (nSG)
Then, it will be possible to view the selected words in the [COMMUNICATION MAP] submenu of the [1.2 MONITORING] menu.
Example:
T
Parameter that can be modified during operation or when stopped.
RUN Term +35.0 Hz 80.0 A
COMMUNICATION MAP
- - - - - - - -- -
- - - - -- - - - -
W3141: F230 Hex
<< >> Quick
ITF- > MCF- > ADL-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com