Installation manual

Overview
S1A28692 03/2010 27
Powering up the drive for the first time
With the integrated display terminal, when powering up the drive for the first time, the user immediately
accesses to [Standard mot. freq] (bFr) (see page 74
) in the menu (COnF > FULL > SIM).
Display after the drive has been powered up for the first time.
3 seconds
The [ACCESS LEVEL] screen follows automatically.
ENT
Automatically switches to the [1 DRIVE MENU] menu after 3 seconds.
Select the menu and press ENT.
ESC
The MAIN MENU appears on the graphic display terminal if you press the ESC key.
ATV32HU15M2
1.5kW/2HP 220V Single
Config. n°0
RDY Term 0.0 Hz 0.0 A
ACCESS LEVEL
Basic
Standard
Advanced
Expert
RDY Term 0.0 Hz 0.0 A
1 DRIVE MENU
1.1 SPEED REFERENCE
1.2 MONITORING
1.3 CONFIGURATION
Code << >> Quick
MAIN MENU
1 DRIVE MENU
2 IDENTIFICATION
3 INTERFACE
4 OPEN / SAVE AS
5 PASSWORD
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com