Installation manual

Interface (ItF)
270 S1A28692 03/2010
User parameters
If [Return std name] is set to [Yes], the display reverts to standard but the custom settings remain stored.
Selection of 1 to 15
parameters to be
customized.
Note: The 1
st
line is [PARAMETER SELECTION] or
[RDY Term +0.0 Hz 0.0 A] depending on the path (ENT or
List).
List of customized parameters.
If no custom settings have
been made, the standard
values appear (names, units,
etc.).
Display on 1 or 2 lines of
characters.
Offsets and coefficients are
numerical values. Do not use
a too high multiplier
(99,999 - max display).
Use F1 to change to ABC, abc, 123, *[-.
Use the jog dial to increment the character (alphabetical order),
and << and >> (F2 and F3) to switch to the next or previous
character respectively.
Standard: use of the
factory set unit.
Customized: customization
of the unit.
%, mA, etc.: select from
drop-down list.
Once you have entered the unit,
if you press ENT, the Ramp
increment screen will re-appear
in order to display the name.
Press ESC to return to Unit.
The message entered appears
while the View key is pressed.
Names (USER MENU NAME, DRIVE NAME, configuration, serial no., lines of messages,
names of units, etc.) are customized as in the example of the parameter name shown
opposite.
If no custom settings have been made, the standard values appear (names, units, etc.).
Display on 1 or 2 lines of characters.
Use F1 to change to ABC, abc, 123, *[-.
Use the jog dial to increment the character (alphabetical order), and
<< and >> (F2 and F3) to switch to the next or previous character respectively.
RDY Term 0.0 Hz 0.0 A
USER PARAMETERS
Return std name : No
PARAMETER SELECTION
CUSTOMIZED SELECTION
MY MENU
DEVICE NAME
Code << >> Quick
SERVICE MESSAGE
CONFIGURATION 0
CONFIGURATION 1
CONFIGURATION 2
SERIAL NUMBER
ENT
ENT
ENT
ENT
ENT
ENT
ENT
RDY Term +0.0 Hz 0.0 A
Unit
Standard
Customized
%
mA
Quick
List
PARAMETER SELECTION
SETTINGS
Ramp increment
Acceleration
Deceleration
Acceleration 2
Deceleration 2
List
PARAMETER SELECTION
FULL
SIMPLY START
SETTINGS
MOTOR CONTROL
INPUTS / OUTPUTS CFG
COMMAND
List
RDY Term +0.0 Hz 0.0 A
CUSTOMIZED SELECTION
Ramp increment
Acceleration
Deceleration 2
Delete
RDY Term +0.0 Hz 0.0 A
Ramp increment
User name
Unit
Multiplier
Divisor
Offset
RDY Term +0.0 Hz 0.0 A
User name
1 DRIVE MENU
FLOW REFERENCE
Nb characters max. 13
ABC << >>
RDY Term +0.0 Hz 0.0 A
SERVICE MESSAGE
LINE 1
LINE 2
LINE 3
LINE 4
LINE 5
View Quick
RDY Term +0.0 Hz 0.0 A
Customized
1 DRIVE MENU
LBS
Nb characters max. 3
ABC << >>
RDY Term +0.0 Hz 0.0 A
LINE 2
1 DRIVE MENU
For any service, dial:
Nb characters max. 23
ABC << >> Quick
RDY Term +0.0 Hz 0.0 A
USER MENU NAME
1 DRIVE MENU
FLOW REFERENCE
Nb characters max. 18
ABC << >> Quick
ENT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com