Installation manual

Interface (ItF)
274 S1A28692 03/2010
Parameters described in this page can be accessed by:
Code Name / Description Factory setting
pAC- [PARAMETER ACCESS]
prO- [PROTECTION]
pCd- [PROTECTED CHANNELS]
COn
PS
Mdb
CAn
nEt
[HMI] (COn): Graphic display terminal or remote display terminal
[PC Tool] (PS): PC Software
[Modbus] (Mdb): Integrated Modbus
[CANopen] (CAn): Integrated CANopen®
[Com. card] (nEt): Communication card (if inserted)
UIS- [VISIBILITY]
PUIS [PARAMETERS]
[Active] (ACt)
T
Parameter visibility: only active ones, or all parameters.
ACt
ALL
[Active] (ACt)
[All] (ALL)
T
Parameter that can be modified during operation or when stopped.
ITF- > DCF- > PAC- > PRO- > PCD-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com