Installation manual

Open / Save as (trA)
278 S1A28692 03/2010
[4.2 SAVE AS]: To download the current drive configuration to the graphic display terminal.
Various messages may appear when the download is requested:
• [TRANSFER IN PROGRESS]
• [DONE]
• Error messages if download not possible
• [Motor parameters are NOT COMPATIBLE. Do you want to continue?]: In this case, the download is
possible, but the parameters will be restricted.
See details on the
next page.
ENT
RDY Term 0.0 Hz 0.0 A
4. OPEN / SAVE AS
4.1 OPEN
4.2 SAVE AS
Code << >> Quick
ENT
ENT
ENT
...
ENT
Note: Opening an empty file
has no effect.
RDY Term 0.0 Hz 0.0 A
4.1 OPEN
File 1 Used
File 2 Empty
File 3 Empty
File 4 Empty
Code << >> Quick
ENT
Saving to a used file deletes
and replaces the
configuration contained in this
file.
RDY Term 0.0 Hz 0.0 A
4.2 SAVE AS
File 1 Used
File 2 Free
File 3 Free
File 4 Free
Code Quick
RDY Term 0.0 Hz 0.0 A
DOWNLOAD GROUP
None
All
Drive configuration
Motor parameters
Communication
Code Quick
RDY Term 0.0 Hz 0.0 A
DOWNLOAD
PLEASE CHECK THAT
THE DRIVE WIRING IS OK
ESC = abort ENT = continue
Code Quick
RDY Term 0.0 Hz 0.0 A
DOWNLOAD
TRANSFER IN PROGRESS
RDY Term 0.0 Hz 0.0 A
DOWNLOAD
DONE
ENT or ESC to continue
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com