Installation manual

S1A28692 03/2010 287
Maintenance
10
Maintenance
Limitation of Warranty
The warranty does not apply if the product has been opened, except by Schneider Electric services.
Servicing
It is recommended to do the following in order to optimize continuity of operation.
Note: The fan operation depends on the drive thermal state. The drive may be running and the fan not.
Spares and repairs
Serviceable product. Please refer to your Customer Care Centre.
Long time storage
The product capacitor performances after a long time storage above 2 years can be degraded. See page 10
.
Fan replacement
It is possible to order a new fan for the ATV32 maintenance, see the commercial references on
www.schneider-electric.com.
Please refer to Installation manual to replace the fan.
CAUTION
RISK OF DAMAGE TO THE DRIVE
Adapt the following recommendations according to the environment conditions: temperature, chemical, dust.
Failure to follow these instructions can result in equipment damage.
Environment Part concerned Action Periodicity
Knock on the product Housing - control block
(led - display)
Check the drive visual aspect At least each year
Corrosion Terminals - connector - screws -
EMC plate
Inspect and clean if required
Dust Terminals - fans - blowholes
Temperature Around the product Check and correct if required
Cooling Fan Check the fan operation
Replace the fan After 3 to 5 years, depending
on the operating conditions
Vibration Terminal connections Check tightening at recom-
mended torque
At least each year
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com