Installation manual

Overview
32 S1A28692 03/2010
Finding a parameter in this document
The following assistance with finding explanations on a parameter is provided:
• With the integrated display terminal and the remote display terminal: Direct use of the parameter code
index, page 301
, to find the page giving details of the displayed parameter.
• With the graphic display terminal: Select the required parameter and press F1 : [Code]. The
parameter code is displayed instead of its name while the key is held down.
Example: ACC
• Then use the parameter code index, page 301, to find the page giving details of the displayed parameter.
RDY Term +0.0 Hz 0.0 A
SETTINGS
Ramp increment : 0.1
Acceleration : 9.51 s
Deceleration : 9.67 s
Low speed : 0.0 Hz
High speed : 50.0 Hz
Code << >> Quick
Code
RDY Term +0.0 Hz 0.0 A
SETTINGS
Ramp increment : 0.1
ACC : 9.51 s
Deceleration : 9.67 s
Low speed : 0.0 Hz
High speed : 50.0 Hz
Code << >> Quick
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com