Installation manual

Monitoring Mode (MOn)
S1A28692 03/2010 53
Parameters described in this page can be accessed by:
CMM- [COMMUNICATION MAP] (continued)
OSA- [COM SCAN OUTPUT MAP]
nC1 [Com Scan Out1 val.]
Value of the 1st output word.
nC2 [Com Scan Out2 val.]
Value of the 2nd output word.
nC3 [Com Scan Out3 val.]
Value of the 3rd output word.
nC4 [Com Scan Out4 val.]
Value of the 4th output word.
nC5 [Com Scan Out5 val.]
Value of the 5th output word.
nC6 [Com Scan Out6 val.]
Value of the 6th output word.
nC7 [Com Scan Out7 val.]
Value of the 7th output word.
nC8 [Com Scan Out8 val.]
Value of the 8th output word.
CMM- [COMMUNICATION MAP] (continued)
CI- [CMD. WORD IMAGE]
Command word image: Only accessible via graphic display terminal.
CMd1 [Modbus cmd.]
Modbus command word image.
CMd2 [CANopen cmd.]
CANopen® command word image.
CMd3 [COM. card cmd.]
Communication card command word image.
CMM- [COMMUNICATION MAP] (continued)
rI- [FREQ. REF. WORD MAP]
Frequency reference image: Only accessible via graphic display terminal.
LFr1 [Modbus ref.]
Hz
Modbus frequency reference image.
LFr2 [CANopen ref.]
Hz
CANopen® frequency reference image.
LFr3 [Com. card ref.]
Hz
Communication card frequency reference image.
CMM- [COMMUNICATION MAP] (continued)
CnM- [CANopen MAP]
CANopen® image: Only accessible via graphic display terminal.
COn [RUN LED]
View of the CANopen® RUN Led Status.
CAnE [ERR LED]
View of the CANopen® Error Led Status.
PO1-
[PDO1 IMAGE]
View of the RPDO1 and TPDO1.
rp11 [Received PDO1-1]
g
First frame of the received PDO1.
Code Name / Description Unit
DRI- > MON- > CMM- > OSA-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com