Installation manual

Monitoring Mode (MOn)
60 S1A28692 03/2010
Parameters described in this page can be accessed by:
CMP1 [Cmd word]
Command register of detected fault record 1 (same as [Cmd word] (CMd) page 50).
LCP1 [Motor current]
A
Estimated motor current of detected fault record 1 (same as [Motor current] (LCr) page 44).
rFp1 [Output frequency]
Hz
Estimated motor frequency of detected fault record 1 (same as [Output frequency] (rFr) page 44).
rtp1 [Elapsed time]
h
Elapsed run time of detected fault record 1 (same as [Elapsed time] (rtH) page 56).
ULp1 [Mains voltage]
V
Main voltage of detected fault record 1 (same as [Mains voltage] (ULn) page 44).
tHP1 [Motor thermal state]
%
Motor thermal state of detected fault record 1 (same as [Motor thermal state] (tHr) page 44).
dCC1 [Command Channel]
Command channel of detected fault record 1 (same as [Command channel] (CMdC) page 50).
drC1 [Channel ref. active]
Reference channel of detected fault record 1 (same as [Channel ref. active] (rFCC) page 50).
pFH- [FAULT HISTORY] (continued)
Shows the 8 last detected faults.
dP2 [Past fault 2]
Identical to [Past fault 1] (dP1) page 58.
dP3
[Past fault 3]
Identical to [Past fault 1] (dP1) page 58.
dP4
[Past fault 4]
Identical to [Past fault 1] (dP1) page 58.
dP5
[Past fault 5]
Identical to [Past fault 1] (dP1) page 58.
dP6 [Past fault 6]
Identical to [Past fault 1] (dP1) page 58.
dP7 [Past fault 7]
Identical to [Past fault 1] (dP1) page 58.
dP8 [Past fault 8]
Identical to [Past fault 1] (dP1) page 58.
Code Name / Description Unit
DRI- > MON- > DGT- > PFH-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com