Installation manual

Configuration Mode (ConF)
98 S1A28692 03/2010
Parameters described in this page can be accessed by:
Asynchronous motor parameters: Expert mode
(1) On the integrated display unit: 0 to 9,999 then 10.00 to 65.53 (10,000 to 65,535).
Code Name / Description Adjustment range Factory setting
ASY- [ASYNC. MOTOR]
rSA [Cust stator resist.]
0 to 65,535 mOhm 0 mOhm
g
(1)
Cold state stator resistance (per winding), modifiable value.
The factory setting is replaced by the result of the auto-tuning operation, if it has been performed.
LFA [Lfw]
0 to 655.35 mH 0 mH
g
Cold state leakage inductance, modifiable value.
The factory setting is replaced by the result of the auto-tuning operation, if it has been performed.
IdA [Idw]
0 to 6,553.5 A 0 A
g
Customer adjusted magnetizing current.
trA [Cust. rotor t const.]
0 to 65,535 ms 0 ms
g
Customer adjusted rotor time constant.
g
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can
also be accessed and adjusted from within the configuration menu for the corresponding function, their description is detailed
in these menus, on the pages indicated, to aid programming.
DRI- > CONF > FULL > DRC- > ASY-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com