User`s manual

Software Configuration Examples
02/2005 19
LUFP7 Gateway With the ABC LUFP Configuration Tool
Introduction With this tool (can be downloaded from Internet: www.hms.se/abc_lufp.shtml), the
gateway between the Profibus and the Modbus networks is configured. In this
example, the Profibus Master is a Schneider Premium PLC and the Modbus Slave
an XPS-MC Safety Controller. The following steps detail the configuration process:
Step Action
1 Define the networks (See Define the Networks, p. 20)
2 Add commands (See Add Commands, p. 23)
3 Save and download to the gateway (See Save and Download to the Gateway,
p. 32)