User`s manual

Software Configuration Examples
22
02/2005
5 In the right-hand window, enter the slave address. e.g. 32.
Update slave address:
6Click on Sub-Network to enter the relevant values in the right-hand window. In
this example the standard values for the XPS-MC Safety Controller are shown.
The values entered must be the same as the values configured by the
XPSMCWIN configuration tool for the XPS-MC Safety Controller.
Standard values for sub-network:
Hint: For additional slaves, click on the left window Sub-Network, then on Sub-
Network in the menu bar and select Add Node!
Step Action