Installation manual

Introduction
1–4 152936
This manual is for use by qualified personnel only.
ON/OFF Switch
The Xantrex GT250 E incorporates a maintained position ON/OFF switch located
on the right center door, under the main control display. Under normal conditions,
the
ON/OFF switch is in the ON position. Turning the switch to the OFF position will
initiate an immediate controlled shutdown of the Xantrex GT250 E and open both
the main AC and DC contactors within the unit. The main AC and DC contactors
cannot be closed unless the switch is in the
ON position. The Xantrex GT250 E is
prevented from being restarted until the
ON/OFF switch is turned back to the ON
position.
WARNING: Shock Hazard
Turning the ON/OFF switch to the OFF position does NOT remove all hazardous
voltages from inside the inverter. Before attempting to service the Xantrex GT250
E, follow the de-energize Lockout and Tag procedure page ix.
Figure 1-2 ON/OFF Switch