Specifications

Mounting the Xantrex XW SCP
975-0298-01-01 2–7
Mounting the Xantrex XW SCP
The Xantrex XW SCP can be mounted three ways:
• Flush mounted through an opening in a wall using the mounting plate
• Surface mounted using the mounting bracket
• Flush mounted through an opening in a wall and secured with four
#6 screws.
To flush mount the Xantrex XW SCP with mounting plate:
1. Using a jigsaw and the supplied template sticker as a guide, cut out
the hole for the mounting plate. The mounting plate fastens to walls
up to 19 mm thick.
2. Route the Xantrex Xanbus cable(s) inside the wall and through
the opening.
WARNING: Shock hazard
Before making an opening in a wall or panel, ensure there is no wiring or
other obstruction within the wall.
CAUTION: Equipment damage
Provide adequate space within the wall for the Xantrex Xanbus cables to
bend. Do not bend the cable to one side after it leaves the Xantrex
Xanbus port. The mounting bracket itself does not provide enough space
for the cables to bend. Attempting to route the cables through the side of
the mounting bracket without providing space for the cables within the
wall may damage to the Xantrex XW SCP Xantrex Xanbus ports and
cause network communication problems.