Specifications

Installation
2–8 975-0298-01-01
3. Insert the mounting plate with the two tabs in a vertical position into
the hole (see Figure 2-4).
4. Secure the mounting plate by tightening the two screws to rotate the
tabs to the horizontal position (see Figure 2-5) and pull the tabs tight
against the inner surface of the wall. Be careful not to overtighten the
screws and damage the wall.
Figure 2-4 Inserting the Mounting Plate
Tabs in vertical position
Figure 2-5 Securing the Mounting Plate
Rotate tabs to
horizontal position