Specifications

Mounting the Xantrex XW SCP
975-0298-01-01 2–9
5. Connect the Xantrex Xanbus cable(s) (and terminator if necessary)
to either network input on the back of the Xantrex XW SCP.
See Figure 2-6.
Connect a network terminator to the Xantrex XW SCP if it is the last
device at the end of a daisy chain network layout.
6. Place the unit into the mounting plate and secure it with four
#6 screws.
7. Peel off the protective plastic coating covering the screen and
indicator light.
Important: To ensure communication signal quality, the network must be
terminated at each end with a terminator.
Figure 2-6 Connecting the Network Cables
Figure 2-7 Securing the Xantrex XW SCP