Specifications

Configuration
3–6 975-0298-01-01
Changing Settings for a Device
You can view and change device settings from the device setup menu.
Basic menu Each Device Setup menu can be displayed in Basic and Advanced
formats. The Basic menu contains configuration items you may have to
adjust routinely, or as part of initial setup.
Advanced
menu
The Advanced menu gives you access to the full set of configuration
menus for that device, including everything displayed on the
Basic menu. As a safeguard against unintended advanced
configuration, the Xantrex XW SCP displays the Basic menu by default.
To view the Advanced menu, you must perform a special keypress.
Figure 3-2 Selecting a Device Setup Menu
Select Device menu
Select Device
XW6048
XW6048 00: Setup
Meters
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Operating]
XW Inverter/Charger
Setup menu
To view Device Setup
menu, highlight the
device name and press
Enter
Note: The Xantrex XW System Control Panel
displays only four lines of the Setup menu at
one time. To view additional settings, press the
Down arrow button.
Select Device menu
Xantrex XW Inverter/Charger
Setup menu
WARNING: Risk of fire and shock hazard
The Advanced settings for devices other than the Xantrex XW SCP are
intended for qualified installation/service personnel only. Before changing
advanced settings, you must be familiar with the settings and the
system-wide impact of changing those settings. Setting parameters
incorrectly could damage connected equipment (such as batteries) or
could severely affect the performance of your system. Incorrect charging
configuration can lead to battery damage and risk of fire. Consult the
local utility before enabling sell mode or changing sell mode settings.