Specifications

Configuring the Xantrex XW System Control Panel
975-0298-01-01 3–9
Xantrex XW SCP Configuration Items
The Xantrex XW SCP Setup menu contains settings for changing the
appearance of the display, enabling button-press and alarm sounds,
and setting the temperature scale. Items in gray appear only on the
advanced menu.
Menu item
Menu item
(translation) Description Values/Action Default
Brightness Adjusts the brightness of
the display to suit interior
light conditions and
enhance visibility.
20% to 100%
(increments of 10%)
60%
Contrast Adjusts the contrast of the
display to suit viewing
angle and enhance
visibility.
0% to 100%
(increments of 5%)
60%
Light Timer Sets how long the
backlight remains on after
the last button press on the
Xantrex XW SCP.
Off, 1mins–60mins
(increments of
1 minute)
2mins
Button Beep Enables buttons to beep
when pressed.
On, Off Off
Fault Alarm Enables an alarm to sound
when a fault occurs.
On, Off Off
LoBatt Alarm Enables an alarm to sound
when a low battery voltage
condition exists.
On, Off Off
Set Degrees Selects the temperature
scale the Xantrex XW SCP
will display.
Fahrenheit, Celsius Fahrenheit
Name Allows you to customize
the name of the Xantrex
XW SCP as it is displayed
on the setup menu and the
Select Device menu.
Press Enter to begin
customizing the
name. See “Setting
the Device Name”
on page 3–10.
Xantrex
XW SCP
Clear Faults/
Warnings
Clears active faults and
warnings generated by the
Xantrex XW SCP.
Press Enter to clear
faults and warnings.
n/a