Specifications

Using the Clock Menu
975-0298-01-01 3–13
Setting the Time
Because the Xantrex XW SCP keeps time for the power system, setting
the clock to the correct local time is essential for the system to operate as
expected. The clock also provides the time stamps for the Warning
and Fault logs.
When you first power up the Xantrex XW SCP, it will not begin operating
normally until you set the time.
To set the clock:
1. On the Clock menu, with Set Time highlighted, press Enter.
The hour value is highlighted.
2. Press the up arrow or down arrow button to change the hour.
3. When the correct hour is shown, press Enter to select it and highlight
the minute.
If you make an error, press Exit to move back to the value you need
to reset. If you decide to abandon resetting the time, press Exit
repeatedly until you return to the Clock menu.
4. Press the up arrow or down arrow button to change the minute.
5. When the correct minute is shown, press Enter to select it and
highlight the AM/PM value.
If you are using a 24-hour clock, you will return to Set Time at this
point. Proceed to step 8.
6. Press the up arrow or down arrow button to choose AM or PM.
7. When the correct value is shown, press Enter to select it and return to
the Clock menu.
8. Press Exit to return to the Select Device menu.
If you make an error, press Exit to move back to the value you need
to reset. If you decide to abandon resetting the time, press Exit
repeatedly until you return to the Clock menu.
Note: The Xantrex XW SCP does not automatically adjust for
Daylight Savings Time or leap year.