Specifications

Operation
4–4 975-0298-01-01
Warning Messages
Warning messages appear when the Xantrex XW SCP detects a
condition that may eventually affect its continued operation. When a
warning occurs, the Xantrex XW SCP continues operating. However, you
should consult the Troubleshooting chapter to find out what actions you
can take to prevent the warning from escalating into a fault.
Types There are two types of warning messages: manual and automatic.
Each differs in its behavior and appearance. For a list of Xantrex XW SCP
warnings and their associated types, refer to Chapter 5, “Troubleshooting”.
If you see a warning message on the Xantrex XW SCP, you will have to
acknowledge it and (if necessary) clear it. Acknowledging the warning
allows you to continue operating the Xantrex XW SCP. Clearing the
warning message stops the warning condition from escalating into
afault.
Acknowledging Warning Messages
Automatic
warnings
Acknowledging an automatic warning message removes the message
from the Xantrex XW SCP screen.
To acknowledge an automatic warning message, press Enter. After you
acknowledge the warning, the Xantrex XW SCP displays the menu for the
device that caused the warning.
The Xantrex XW SCP removes an unacknowledged automatic warning
message from the screen after three minutes. However, if the condition
that caused the warning still exists, the warning message will reappear.
You can view a list of the last 20 warning messages from the Xantrex XW
SCP on the Warning log. See “Viewing the Xantrex XW SCP Warning
Log” on page 4–6.
Figure 4-1 Xantrex XW SCP Warning Message
Warning: W250
continue cancel