Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Clocks
You may notice that your clocks are not accurate. Some of the clocks on your appliances
may reset when the Conext XW Pro is in searchmode. Disabling search mode will
resolve this issue (see "Inverter Settings" on page55).
Searching
When the inverter is in search mode, it may fail to start some loads even though the rated
wattage on the load is more than the Maximum Search Watts setting. Disable search
or apply an additional load (companion load) to make the inverter exit search mode.
Conext XW Pro Owner's Guide Troubleshooting
104 This document is intended for use by qualified personnel 990-91227A-01