Conext XW PRO 6848 6,800W 48V Installation

Product Safety Information
IMPORTANT: Remember to read and follow all product safety information in this
document.
General Safety Instructions
Before using the inverter/charger, read all instructions and cautionary markings on the
unit, the batteries, and all appropriate sections of this manual.
n Use of accessories not recommended or sold by the manufacturer may result in a risk
of fire, electric shock, or injury to persons.
n The inverter/charger is designed to be permanently connected to your AC and DC
electrical systems. The manufacturer recommends that all wiring be done by a
certified technician or electrician to ensure adherence to the local and national
electrical codes applicable in your jurisdiction.
n To avoid a risk of fire and electric shock, make sure that existing wiring is in good
condition and that wire is not undersized. Do not operate the inverter/charger with
damaged or substandard wiring.
n Do not operate the inverter/charger if it has been damaged in any way.
n Most of the parts in this unit are not user-serviceable parts.Do not disassemble the
inverter/charger except where noted for connecting wiring and cabling. See your
warranty for instructions on obtaining service. Attempting to service the unit yourself
may result in a risk of electrical shock or fire. Internal capacitors remain charged after
all power is disconnected.
n To reduce the risk of electrical shock, disconnect both AC and DC power from the
inverter/charger before attempting any maintenance or cleaning or working on any
components connected to the inverter/charger. Putting the unit in Standby mode will
not reduce this risk.
n The inverter/charger must be provided with an equipment-grounding conductor
connected to the AC input ground.
n Do not expose this unit to rain, snow, or liquids of any type. This product is designed
for indoor use only. Damp environments will significantly shorten the life of this
product and corrosion caused by dampness will not be covered by the product
warranty.
n To reduce the chance of short-circuits, always use insulated tools when installing or
working with this equipment.
n Remove personal metal items such as rings, bracelets, necklaces, and watches
when working with electrical equipment.
n Do not expose this unit to excessive shock or vibration. This product is designed for
stationary indoor use only. Mechanical fatigue caused by excessive shock or
vibration can significantly shorten the life of this product and will not be covered by
the product warranty.
Conext XW Pro Owner's Guide Product Safety Information
12 This document is intended for use by qualified personnel 990-91227A-01