Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Figure 26 Conext XW Pro Block Diagram
Conext XW Pro Overload Capability
Loads connected to the inverter are seldom constant, and large loads are often operated
for short periods. To accommodate larger loads, the Conext XW Pro can temporarily
exceed its continuous output power rating.
Thegraphs below illustrate approximate operation time versus load. Inverter operation
time during overload is limited by both inverter internal temperature protection and by the
product of AC output current and elapsedtime.
Specifications Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 125