Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Output Power Versus Ambient Temperature
For the Conext XW Pro 6848 model, the power can be limited by the installed DC and
AC breakers. For example, at 8500 W the DC or AC breakers may disconnect before
the 30 minute rating.
When the internal temperature of the Conext XW Pro exceeds a preset limit, it begins to
limit output power automatically to stop maximum internal temperatures being exceeded.
Figure 29Output Power Versus Ambient Temperature
Specifications Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 127