Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
n Power Factor setting adjustability range from with an adjustability range from - 0.85
lagging to 0.85 leading (EEI
3
Power Factor sign convention).
n When enabled, the PF setting has priority over other functions, which means that
active power may be reduced to achieve the power factor setpoint.
The Fixed Power Factor function is disabled by default.
Figure 43Fixed Power Factor function
Parameter Default Range Observations
Power Factor 0.95 leading
1
EEI Generator reference
frame convention
2
(-0.85 to -0.99) lagging
(0.85 to 0.99) leading
Table 41HECO Fixed Power Factor Function default and adjustability range settings
3
EEI – Edison Electric Institute
2
EEI - Edison Electric Institute
Specifications Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 145