Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Explosive Gas Precautions
WARNING
EXPLOSION HAZARD
The Conext XW Pro is not ignition protected. To prevent fire or explosion, do not install this
product in locations that require ignition-protected equipment. This includes any space
containing gasoline-powered machinery, fuel tanks, as well as joints, fittings, or other
connections between components of the fuel system.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
Working in the vicinity of lead acid batteries is dangerous. Batteries generate explosive
gases during normal operation. Therefore, you must read this Owner's Guide and follow
the instructions exactly before installing or using your inverter/charger.
To reduce the risk of battery explosion, follow these instructions and those published by
the battery manufacturer and the manufacturer of the equipment in which the battery is
installed.
Product Safety Information Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 15