Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Monitoring Charger Status 36
Monitoring Events 36
Equalizing Batteries 36
Using Startup/Shutdown/Standby Modes 38
Monitoring Battery Level 40
Reading the Display Screen 41
Monitoring Operation with the Conext Gateway 41
Accessing the Device in the Web Application 41
Status Page 41
Performance Page 45
Events Page 45
External Monitoring Control 47
Overview 48
SunSpec Modbus 48
Power Limiting 48
Communications Loss 48
IEEE2030.5 49
Configuration 51
Configuration with the Conext Gateway Web Application 52
Accessing the Web Application 52
Setting the Device Name 53
Setting the Device Number 53
Setting the Time and Date 54
Conext XW Pro Configuration Page 54
Controls Settings 54
Inverter Settings 55
Charger Settings 59
AC Settings 73
Grid Support Settings 75
Generator Support Settings 78
Auxiliary Output Settings 80
Multi-Unit Configuration Menu 83
Associations Settings 85
Advanced Features 87
Advanced Device Settings 89
Battery Management System Settings 89
Device Instance Settings 91
Modbus Settings 92
Conext XW Pro Owner's Guide
18 This document is intended for use by qualified personnel 990-91227A-01