Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Features
The Conext XW Pro is a modular building block sine-wave inverter/charger that can be
used for residential and commercial battery based off-grid, grid backup, and grid
interactive applications.
The Conext XW Pro is a self-contained DC to AC inverter, battery charger, and
integrated AC transfer switch. It is configurable in a hybrid system to operate with
generators and renewable energy sources. These configurations are capable of
extending battery based off-grid/backup autonomy.
Performance Highlights
n High-capacity motor load starting with high 30-minute and 5-second power.
n Off-grid AC Coupling with PV inverters using frequency power curtailment method.
n Operation in hot environments up to 40°C without derating.
n Conversion of DC energy to AC energy for export to the utility grid.
n Power factor corrected charging minimizes AC current required for charging.
n Very low distortion sine wave output.
Distinguishing Features
n Grid-interactive feature set enables time management and prioritization of energy
sources and power conversion to support advanced modes of operation such as load
shifting, self consumption and peak load shaving.
n Dual AC input connections with 60 A automatic transfer switch integrates both utility
grid and generator.
n Generator Support functionality assists small generators with heavy loads.
n Auxiliary port assist with relay switching of external devices such as battery room
fans, diversion loads and generators.
n Configurable battery parameters for customized battery charging.
n Field serviceable boards and components.
Xanbus™ Network Communications Protocol
The Conext XW Pro uses Xanbus™, a network communications protocol developed by
Schneider to communicate with other Xanbus-enabled devices. You can configure and
monitor the Conext XW Pro and other Xanbus-enabled devices in the system using the
Conext Gateway (part number 865-0329).
Conext XW Pro Owner's Guide Introduction
22 This document is intended for use by qualified personnel 990-91227A-01