Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Monitoring Operation with the Inverter Information Panel
The inverter information panel on each Conext XW Pro monitors a single Conext XW
Pro. The Conext XW Pro information panel displays basic information and performs start
up, shut down, equalization and standby functions. LEDs on the information panel
indicate AC input status, Conext XW Pro status, battery condition, and charging and
equalization status. The Conext XW Pro LEDs and three-character display screen
indicate warning and event conditions.
Figure 10 Inverter Information Panel
Symbol Description
AC input status.
Second AC input status.
Event status.
Equalizing status.
Battery level of charge.
STARTUP/SHUTDOWN button.
Charging status.
Inverting status.
Conext XW Pro Owner's Guide Monitoring Operation
34 This document is intended for use by qualified personnel 990-91227A-01