Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Configuration with the Conext Gateway Web Application
The Conext XW Pro is configured primarily using the Conext Gateway web application
interface. The Conext Gateway provides access to settings relating to AC input and
output, battery charging, compliance regions, and grid-tie operation. Refer to the Conext
Gateway Owner’s Guide more details.
Accessing the Web Application
Refer to "Logging in to the Conext Gateway Web Application" in the Conext Gateway
Owner’s Guide to gain access to the web application. If connectivity between system
components are working, a Conext XW Pro can be accessed by clicking the device
figure in the Dashboard screen, or its instance under the Devices menu. Device
configuration is available only to the Administrator access level.
NOTICE
EQUIPMENT DAMAGE
Ensure you put the Conext XW Pro in Standby mode prior to changing basic or advanced
settings. Return to Operating mode for the settings to take effect.
Any configuration (change in settings) made when theConext XW Pro is in Operating mode
will not be saved unless theConext XW Pro is put in Standby mode and then back to
Operating mode.
Failure to follow these instructions can result in equipment damage.
Conext XW Pro Owner's Guide Configuration
52 This document is intended for use by qualified personnel 990-91227A-01