Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Front Panel Label
The front panel label contains the LCD display and LED indicators. It also identifies the
various buttons used in inverter operation. For information on the indicators and control
button, see the Figure 9 on page 31.
Figure 2 Inverter Information Panel
Main Product Safety Label
The main product safety label is the main safety label for the inverter which lists general
hazards and instructions on avoiding them. The label is applied on the exterior of the
inverter.
Do not remove, cover, deface, or alter the main product safety label. A localized label
is available to install on the product.
For information on the symbols appearing in the label, see Label Symbols on page 4.
Other Safety Labels
Other safety labels appear on many areas of the equipment to warn of potential hazards
within those areas of the inverter or to call attention to information that clarifies or simplifies
a procedure. Read and follow all safety labels before proceeding.
Do not remove, cover, deface, or alter safety labels. Localized safety labels are
available to install on the product.
For information on the symbols appearing in the label, see Label Symbols on page 4.