Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Audience
This guide is intended for use by anyone needs to operate, configure, and troubleshoot the
Conext XW Pro inverter/charger. Certain configuration tasks should only be performed by
qualified personnel in consultation with your local utility and/or an authorized dealer.
Electrical equipment should be installed, operated, serviced, and maintained only by
qualified personnel. Keep unqualified personnel away from batteries. Servicing of batteries
must only be performed or supervised by qualified personnel with knowledge of batteries
and their required precautions. Qualified personnel have training, knowledge, and
experience in
n Installing electrical equipment.
n Applying all applicable installation codes.
n Analyzing and reducing the hazards involved in performing electrical work.
n Installing and configuring batteries.
n Selecting and using Personal Protective Equipment (PPE).
This guide does not contain information regarding servicing or de-energization for servicing.
No responsibility is assumed by Schneider Electric for any consequences arising out of the
use of this material.