Installation Manual

975-0639-01-01 Rev D xi
This guide for use by qualified personnel only
Important Safety Instructions
Safety Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -vi
Precautions When Working With Batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - viii
FCC Information to the User - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - x
1 Installation
Materials List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–2
Conext SW Front and Side Panels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–3
Front Panel Buttons and Status LEDs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–4
Conext SW AC/DC/Ports Side Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–5
Conext SW Supplied Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–6
Conext SW Required Accessory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–7
Installation Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–8
Before You Begin the Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–8
Installation Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–8
Xanbus Network System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–9
Xanbus System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–9
Xanbus-enabled Products and Other Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–10
Installation Planning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–11
Planning Preparations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–11
Components of the Inverter Power System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–11
AC, DC, and Network Components - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–12
Unpacking and Inspecting the Conext SW Inverter/Charger - - - - - - - - - - - - - - - - - - - - - - - 1–16
Installation Tools and Materials - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–17
Tools - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–17
Materials - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–17
Inverter/Charger Installation- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–18
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–18
Step 1: Choosing a Location for the Inverter/Charger - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–19
Step 2: Mounting the Inverter/Charger - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–19
Step 3: Connecting the AC Input and AC Output Wires - - - - - - - - - - - - - - - - - - - - - - - - - - 1–21
General AC Wiring Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–21
Step 4: Installing the DC Switchgear and Connecting the DC Cables - - - - - - - - - - - - - - - - 1–23
DC Connection Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–23
Installing the DC Switchgear next to Conext SW Inverter/Charger - - - - - - - - - - - - - - - - 1–24
Connecting the DC Cables to the DC Switchgear - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–25
Step 5: Connecting the BTS and Xanbus-enabled Components - - - - - - - - - - - - - - - - - - - - 1–27
Step 6: Performing Checks Prior to Initial Start-Up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–29
Step 7: Testing Your Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–29
Testing in Invert Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–30
Testing in Charge Mode and AC Bypass Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–30
Contents
ConextSW-NA-InstallationGuide.book Page xi Tuesday, July 21, 2015 4:39 PM