Installation Manual

Multiple Unit Configuration
975-0639-01-01 Rev D 1–33
This guide for use by qualified personnel only
Figure 1-16 Multiple (Dual) Unit Configuration Using Two Conext SW Units
AC Out
Cable
AC Out
Cable
AC In
Cable
AC In
Cable
AC Bypass breakers are not shown. For detailed wiring illustration, see “Dual-
Inverter System Renewable Energy (Solar) Wiring” on page 3–8.
AC Output Breakers AC Input Breakers
The Input and Output Neutrals are electrically tied at the inverter terminals. Only a
Neutral wire (from the AC Out cable) is necessary from each inverter.
ConextSW-NA-InstallationGuide.book Page 33 Tuesday, July 21, 2015 4:39 PM