Installation Manual

Wiring a Balanced Three-Phase System
975-0239-01-01 Rev J 3–61
This manual is for use by qualified personnel only
3. In the PDP, attach six two-tab power distribution jumpers in the AC breaker
positions as shown in Figure 3-32 on page 3–61.
4. Connect the AC wiring as shown in Figure 3-33.
Figure 3-32 Power Distribution Jumper Installation (Three-Phase)
Pole 1 Pole 2 Pole 3
GRID BYPASS LOADS
GEN
(optional)
Figure 3-33 PDP Three-Phase AC Wiring
GRID BYPASS LOADS
Grid Distribution Panel Generator or PV
Pole 1 Pole 2 Pole 3
INV1 INV3
AC IN 1
L1
AC IN 1
L2
AC IN 1
L3
INV1 INV3
L1 L2 L3
INV2
AC IN 2
INV2
AC IN 2 AC IN 2
Loads distribution panel
INV1 INV3
L1 L2 L3
INV2
AC OUT AC OUT AC OUT
GEN
(optional)
XW-NA-Install.book Page 61 Wednesday, August 12, 2015 2:23 PM