Installation Manual

Specifications
A–2 975-0239-01-01
This manual is for use by qualified personnel only
Electrical Specifications
Note: Specifications are subject to change without prior notice.
Table A -1 Conext XW+ Inverter/Charger Electrical Specifications
Conext XW+ 6848 NA Conext XW+ 5548 NA
Continuous Output Power 6,800 W 5,500 W
Surge Rating (Overload for 1 minute) 12,000 W 9,500 W
Surge Rating (Overload for 5 minutes) 11,000 W 9,000 W
Surge Rating (Overload for 30 minutes) 8,500 W 7,000 W
Surge Current
L-N: 104 A
rms
(60 s)
L-L: 52 A
rms
(60 s)
L-N: 82 A
rms
(60 s)
L-L: 41 A
rms
(60 s)
Waveform True Sine Wave
Idle Consumption—Inverter mode, no load 28 W 26 W
Idle Consumption—Search mode < 8 W
AC Output Voltage L-N: 120 VAC ±3%
L-L: 240 VAC ±3%
AC Input Voltage range
(Bypass/Charger Mode)
L-N: 78–140 VAC (120 V nominal)
L-L: 160–270 VAC (240 V nominal)
AC Input Breaker 60 A double-pole
AC Input Frequency Range
(Bypass/Charger Mode)
52–68 Hz (default)
44–70 Hz (allowable)
AC Output Current (maximum 75%
imbalance between L1-N, L2-N) in Inverter
Mode
L-N: 48 A
L-L: 28 A
L-N: 46 A
L-L: 23 A
AC Output Breaker 60 A double-pole
AC Output Frequency 60.0 ±0.1 Hz
Total Harmonic Distortion < 5% at rated power
Automatic Transfer Relay 60 A
Auxiliary Relay Output 0–12 VDC, maximum 250 mA DC
Peak Efficiency 95.7% 95.7%
CEC Weighted Efficiency 92.5% 93.0%
CEC Power Rating
6,000 W
a
5,760 W
b
4,400 W
DC Input Voltage (Nominal) 48 VDC
DC Input Voltage Range 40–64 VDC 40–64 VDC
XW-NA-Install.book Page 2 Wednesday, August 12, 2015 2:23 PM