Installation Manual

Contents
xvi 975-0239-01-01 Rev J
This manual is for use by qualified personnel only
Communications Network Preparation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–12
Battery Bank Preparation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–13
Battery Bank Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–14
Battery Cable Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–14
Torque Values - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–16
Torque values for the Conext XW+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–16
Torque Values for the Conext XW+ Power Distribution Panel - - - - - - - - - - - - - - - - - - - - - - 2–16
3 Wiring the Conext XW+ and Conext XW+ PDP
Removing the AC Access Panel and PDP Internal Faceplates - - - - - - - - - - - - - - - - - - - - - - - - - 3–2
AC Access Panel Removal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–2
Conext XW+ Power Distribution Panel Internal Faceplate Removal - - - - - - - - - - - - - - - - - - - 3–4
Communication Ports and BTS Port - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–5
AUX Port - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–5
AUX+12V Voltage Supply - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–6
AUX-RPO: User Remote Power OFF (RPO) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–6
User Line Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–7
AUX Port Terminal Assignments - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–7
Wiring the Conext XW+ Inverter/Charger with a PDP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–7
Conext XW+ Inverter/Charger Grounding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–8
Grounding the DC System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–8
Battery Temperature Sensor Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–10
Making DC Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–11
Making AC Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–17
AC Terminal Block - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–18
AC Equipment Grounding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–20
AC System Bonding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–21
AC wiring the Conext XW+ PDP to the Conext XW+ Inverter/Charger - - - - - - - - - - - - - 3–22
Wiring the Conext XW+ Power Distribution Panel to a Generator (On-Grid) - - - - - - - - - 3–24
Wiring the Conext XW+ Power Distribution Panel to a Generator (Off-Grid) - - - - - - - - - 3–25
AC Wiring to the Inverter Load Sub-Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–26
To connect the Conext XW+ PDP to the Inverter Load Sub-Panel and Utility Grid: - - - - 3–27
Basic Functional Test – Single Inverter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–28
Confirming All Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–29
Applying DC Power to the Inverter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–30
Enabling the Inverter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–31
AC Voltage Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–33
Confirming Battery Charger Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–33
Wiring Additional Conext XW+ units with a PDP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–36
Pre-Installation Steps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–36
Conext XW+ Inverter/Charger Grounding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–38
Dual Inverter/Charger Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–38
DC Grounding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–38
DC positive bus bar installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–39
XW-NA-Install.book Page xvi Wednesday, August 12, 2015 2:23 PM