Installation Manual

Overview
975-0239-01-01 Rev J 1–3
This manual is for use by qualified personnel only
Battery Temperature Sensor
The Battery Temperature Sensor (BTS) included in this package monitors the
temperature of the battery bank and adjusts the charging accordingly. For
installation instructions, see “Battery Temperature Sensor Installation” on page 3–
10 of this Guide.
Conext XW Jumpers (For Single-Phase Conversion)
Conext XW Jumpers are used to reconfigure a standard Conext XW+ 120V/240V,
three-wire, split-phase model to accept a 120 V, 2-wire, single-phase connection.
Use the jumpers to reconfigure the transformer wires. For more information, see
Appendix C, “Split-Phase to Single-Phase Conversion Instructions” in this Guide.
XW-NA-Install.book Page 3 Wednesday, August 12, 2015 2:23 PM