Installation Manual

Optional Accessories
975-0239-01-01 Rev J 1–9
This manual is for use by qualified personnel only
Conext System Control Panel
Part Number
865-1050-01
The Conext System Control Panel (SCP) gives a single point of control to set up
and monitor your entire Conext XW+ Inverter/Charger installation.
Featuring a graphical, backlit liquid crystal display, the SCP displays
configuration and diagnostic information for devices connected to the network.
For installation instructions, see “Conext XW+ Inverter/Charger Accessories
Installation” on page 5–1 of this Guide.
Conext Automatic Generator Start
Part Number
865-1060-01
The Conext Automatic Generator Start (AGS) can automatically start and stop a
generator, providing your Conext XW+ Inverter/Charger with power to recharge
depleted batteries while powering your loads. The AGS adds intelligence to
power management and minimizes time spent monitoring batteries and inverter
loads.
For more information, see the Conext Automatic Generator Start Owner’s Guide.
Figure 1-8 Conext System Control Panel
Standby
Event/Warning
Conext XW SCP
Figure 1-9 Conext Automatic Generator Start
XW-NA-Install.book Page 9 Wednesday, August 12, 2015 2:23 PM