Installation Manual

Pre-Installation
975-0239-01-01 Rev J 2–3
This manual is for use by qualified personnel only
Location
The Conext XW+ is certified for dry, indoor (heated or unheated) installations
only.
Locate any electronic equipment susceptible to radio frequency and
electromagnetic interference as far away from the inverter as possible.
Fire safety
WARNING
IGNITION AND FIRE HAZARD
This equipment is not ignition protected. To prevent fire or explosion, do not
install this product in locations that require ignition-protected equipment. This
includes any confined space containing lead acid batteries, or flammable
chemicals such as, natural gas (NG), liquid petroleum gas (LPG) or gasoline
(Benzine/Petrol).
• Do not install in a confined space with machinery powered by flammable
chemicals, or storage tanks, fittings, or other connections between
components of fuel or flammable chemical systems.
• Do not install the inverter near readily flammable materials such as cloth,
paper, straw, or plastic sheeting. Keep flammable materials a minimum
distance of 600 cm (24 in.) from the top surface and 30 cm (12 in.) from either
side surface and the front of the Conext XW+ Inverter/Charger.
Failure to follow these instructions can result in death or serious injury.
XW-NA-Install.book Page 3 Wednesday, August 12, 2015 2:23 PM