Installation Manual

About This Guide
975-0239-01-01 Rev J v
This manual is for use by qualified personnel only
About This Guide
Purpose
The purpose of this Installation Guide is to provide explanations and procedures
for installing the Schneider Electric Conext XW+ Inverter/Charger.
Scope
The Guide provides safety guidelines, detailed planning, and procedures for
installing the Conext XW+ Inverter/Charger and related system components. It
does not provide details about configuration, operation, maintenance, or
troubleshooting. See the Operation Guide or Owner’s Guide of each device for
this information. This Guide does not provide details about particular brands of
batteries, photoelectric cells, or generators. Consult individual battery
manufacturers for this information.
Audience
This Installation Guide is intended for any qualified personnel planning to install
the Conext XW+ Inverter/Charger and related system components. Qualified
personnel have training, knowledge, and experience in:
• Installing electrical equipment
• Applying applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Installing and configuring batteries
• Selecting and using Personal Protective Equipment (PPE)
Servicing of batteries must only be performed or supervised by qualified
personnel knowledgeable of batteries and the required precautions. Keep
unqualified personnel away from batteries.
No responsibility is assumed by Schneider Electric for any consequences arising
out of the use of this material.
XW-NA-Install.book Page v Wednesday, August 12, 2015 2:23 PM