Installation Guide

Making the waterline

connections

□ Thread the nut (1) on the supply line onto the

outlet of the water supply valve (2) and tighten

with a wrench. Do not overtighten.

Installation (continued)

Hot

Remove the quick connector

□ If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Installing the weights

□ Install the weight clip (L) at the point of the hose (K) marking “weights here”.

□ Insert the weights (M) onto the clip (L) by sliding it down onto the clip (L).

Weights

here

Weights

here

Squeeze

Pull

down