Installation Guide
12
Troubleshooting
1
The cartridge is damaged
□ When you turn the handle to the full on position,
the water will turn on.
□ But when you turn the handle to the full off
position without contacting the sensor, the
water does not turn off.
□ This indicates that the cartridge is damaged.
Turn off the water supply, remove the handle
and replace the cartridge (1).
1
2
The control box is damaged
□ When you turn the handle to the full on position,
the water will turn on.
□ However, when you move your hand in front
of the sensor, the water does not turn off as
it should.
□ This indicates that the control box is damaged.
Turn off the water supply and remove the
control box (1).
1