Installation Guide

9
Installation (continued)
11
Installing the battery pack
□ Before installation, select the location for the battery pack (P) and verify that the battery pack wire will
reach the connection on the bottom of the control box (O).
□ One option to install the battery pack is with the tap (2). First, attach one side of the tap to the wall. Then
attach the other piece to the back of the battery pack seat (1). Finally, put the battery pack (P) into the
battery pack seat (1).
□ Another option is to install the battery pack with the screws (3 & 4). First, drill the hole on the wall.
Then thread the screws (3) to the hole on the wall and tighten the battery pack seat (1) to the wall with
the screws (4). Finally, put the battery pack (P) into the battery pack seat (1).
□ Insert the battery pack cable (6) into the control box port (5).
1
P
1
2
1
6
P
1
3
4
OR
5
O
www.schonsimplymodern.com
Please contact [phone] for further assistance.