Exploded Parts

IMPORTANT
Person who opens carton should record the
following information for future service.
CODE # ______ Four-digit number on outside of carton.
PACKER # ______ See crystal package label.
ORDER # ______ See crystal package label.
See diagram on back page
Follow steps in exact order
Save this trim diagram for future reference
1
Instructions for electrician
STEP 2
16 Lights
Length: 20"
Width: 20"
Height: 5"
Hanging Weight: 31 lbs.
HIS DESIGN IS THE PROPRIETARY
TRADE DRESS/TRADEMARK OF
SCHONBEK WORLDWIDE LIGHTING INC.
T
SCHONBEK IS A WORLD LEADER IN CHANDELIER DESIGN. PATENTS INCLUDE:
#5,144,541, #5,222,805 & #5,460,269
2 Remove the screw collar, decorative metal cover and metal canopy from the canopy
assembly. Remove cable socket screws from top of mounting plate so that you can
feed suspension cables through the cable sockets from the top. The cast cable ends
are seated in the inside of the cable socket. Assemble cable sockets with cables in-
stalled onto the bottom of the mounting plate with the cable socket screws securely.
Attach mounting plate to the outlet box with cables hanging down. Feed suspension
cables through the four holes on the metal canopy and decorative metal cover. The
metal canopy must be on top of the decorative metal cover. Feed cable into cable glider
on chandelier frame and hang at desired height. Slide cables into gliders and allow
them to play out of the side of the cable gliders. To adjust height, depress the cable
grippers until the cable is released to move the frame up and down the cable. Feed
stem wire through screw collar, stem wire hole in decorative metal cover and metal
canopy. When chandelier is at desired height, trim stem wire and connect ground wire
(marked with green tracer) and power wires (black or white tracers) in outlet box. Raise
metal canopy and decorative metal cover to ceiling and secure to running thread with
the screw collar. Cut suspension cables with cable cutters leaving about 1/2" protruding
from the side of the cable gliders.
OUTLET
BOX
CABLE
SOCKET
SCREWS
CABLE
SOCKET
CABLE
STEM WIRE
HOLE
SCREW
COLLAR
DECORATIVE
METAL COVER
METAL
CANOPY
MOUNTING
PLATE
RUNNING
THREAD
STEM WIRE
CAST CABLE
END
QUANTUM 2272-__ __ TRIM DIAGRAM
(Trim Option)