Manual

20
MANUAL SF9003BT
8. TROUBLESHOOTING
Problem Possible cause Possible solution
Only the LEVEL
LEDs are lit
You are aiming at
the wrong satellite
Turn the antenna further
until the QUALITY LEDs
also light up.
All LEDs are off. The satellite finder
is not receiving any
supply voltage.
Check whether the
power supply connected
to the connection "DC5
V-18V" is switched on.
Antenna rotates,
but the satellite
finder shows no
deflection.
Antenna tilt not set
correctly or direc-
tion incorrect.
Check the settings and
the orientation of the
antenna as described in
point 2.1.
No Bluetooth
®
connection.
Bluetooth
®
is not
switched on at the
smartphone or the
satellite finder is
not ready.
Make sure that you have
activated Bluetooth
®
on
your smartphone. The
satellite finder must be
supplied with power
(receiver/power bank),
otherwise the Bluetooth
®
interface is not activated.
Smartphone re-
quests Bluetooth
pairing
Close the pairing prompt
and execute the connec-
tion via the app. See 7.2
Device accidentally
paired
Delete Bluetooth
®
pairing
on smartphone
Switching the
sound signal on/off
Switch off the sound
signal in the app
(point 7.4.4).
Satfinder is not
recognised by the
App
See item "Device
accidentally paired".