Manual

4
MANUAL SF9003BT
WARNING
Handle the unit with care! Do not throw or drop the unit! If the unit is
damaged, it must not be put into operation.
Replace damaged cables immediately with new ones in good condi-
tion. Do not immerse the unit in water! If water gets inside the unit,
do not operate the unit.
The operating instructions are part of the product and must be passed
on to the future owner if the product is sold!
Usable LNB types:
• Single LNB
• Twin LNB
• Quad LNB
• Quattro-LNB
• Monoblock LNBs
• Unicable LNB (legacy-port)
1.3 Mounting and connecting the SF9003BT
1. Mount your antenna on a mast or wall bracket provided for this
purpose. Wall bracket.
2. Tighten the screws on the antenna only enough so that it can still
be turned.
3. Connect a connection cable from the LNB connection with the BNC
adapter to the LNB input of the SAT-FINDER.
4. Now connect your SAT receiver to the DC 5-18V output of the
SAT-FINDER with the input. (see connection example). This output
can also be connected to an 18V power supply unit (DC) or to a
USB power bank using the adapter cable.
5. When all cables are properly connected, the device connected to
the DC 5-18V output can be switched on.