Owner`s manual

29
Profile Programs
These programs automate different resistances and workout levels.
Course 1 Course 2
Circuit 1 Circuit 2
Pursuit 1 Pursuit 2
To start a Profile Program:
1. Step onto the machine. Push START/ENTER and start to pedal.
2. Use the Increase() or Decrease() buttons to select a user (guest or custom) and push
START/ENTER. If you select a custom user (not Guest User), use the Increase/Decrease
buttons to select the Workout option.
3. Use the Increase() or Decrease() buttons to select one of the above programs. Push
START/ENTER.
4. Use the Increase() and Decrease()buttonstoanswerthesetupquestions.PushSTART/
ENTER after each answer to record your answers.
Note: The range of values for TIME is 5 - 99 minutes; the default value is 30:00. The range of
values for LEVEL is 1 - 16 (the minimum level in the profile); the default start value is 3.
If you selected a custom User, the default values will be the previous Time and Level
values entered for that User.
5. Push the START/ENTER button to start the profile workout.
Changing Resistance Levels
Push the Increase() or Decrease() buttons to change the resistance level at any time in a work-
out program.