User manual

4
IMPORTANT NOTE: BFEXTB extension is required on vehicles that have their
SAT Tuners located at the rear of the vehicle. BFETXB is sold separately (Not
included) (Acadia, Enclave, Impala, Monte Carlo, Outlook).
TECH TIP: Do not route BFEXTB extension cable over sharp edges or near
moving parts.
BFEXT INSTALLATION:
1. Locate XM tuner box in vehicle.
2. Remove XM harness from XM tuner.
3. Install BFGMLANXMB T harness
between the Factory XM harness
and XM SAT Tuner.
4. Plug the 24 pin Female connector in
to the “T” harness in place of
where the BlueFusion module
would connect.
5. Route BFEXTB cable to under
driver’s seat location.
4. Plug the 24 BFEXTB Male
connector into the BFGMK
BlueFusion interface.
TECH TIP: Aim microphone towards the driver’s seat
MICROPHONE INSTALLATION:
1. Attach the microphone to the headliner above the rear view mirror.
2. Carefully route the microphone cable behind the headliner and down the
“A” (front most) pillar
Use caution when routing cable and avoid sharp edges or moving metal parts.
3. Route the cable to the BlueFusion interface location and plug it into the 3-pin
connector on the Scosche “T “harness.
XM HARNESS
MICROPHONE
3-PIN
XM TUNER
BOX
CAR HARNESS
10ft. EXTENSION
TRUNK MOUNTED
24-Pin
VEHICLES
XM HARNESS
VEHICLES WITH REAR SAT TUNER
BLUEFUSION MICROPHONE INSTALLATION