User manual

7
AUTO-CONNECT/ DISCONNECT (ENTERING AND LEAVING THE VEHICLE)
When the vehicle is started, BlueFusion will automatically connect to the phone
which it was last paired. Some cellular phones may not freely disconnect and
re-connect without user input. If you are having difficulty with this process, there
may be additional settings required in your particular phone that will set
BlueFusion as a “trusted” device. This operation may vary between phone
brands and models.
If you are already on an active call and you enter and start the vehicle,
BlueFusion will automatically switch the call to hands-free mode.
If you are on an active call and the vehicle is turned off, BlueFusion will
automatically transfer the call to the handset.
VOICE DIALING:
NOTE: This feature activates your cell phone’s voice dial function. The cell
phone used must be voice dial compatible.
TO ACTIVATE VOICE DIAL ON THE RADIO:
Scroll to Voice dial in BlueFusion main menu and press seek forward once.
TO ACTIVATE VOICE DIAL FROM THE STEERING WHEEL:
Press the mute button twice. (See page 6 for steering wheel control layout)
HANDS-FREE OPERATION
Your BlueFusion system functions as an XM source through your Factory
Stereo. In order to access BlueFusion, the XM band must be selected
(See diagram).
If listening to a source other than XM, BlueFusion will automatically switch to the
XM band when there is an incoming call. (See note) When the call is ended your
radio may not switch back to the previous source unless the previous source
was XM.
NOTE: Vehicles equipped with Y91 Premium BOSE systems (such as Cadillac
Escalade, Hummer H2, Sierra Denali) will automatically switch back to which-
ever source was previously selected.
SWITCHING BETWEEN SOURCES
AM
FM
CD
DVD/
NAV
XM Sat
BlueFusion
AUX